Product ID:CADOX F-85
MSDS Date:01/01/1985
FSC:6850
NIIN:00N006047
MSDS Number: BCLVK

NOURY CHEMICAL CORPORATION

Emergency Phone: 716-778-8554

Cage: 6H495

NOURY CHEMICAL CORPORATION

Cage: 6H495

METHYL ETHYL KETONE PEROXIDE (MEKP) (SARA III)

CAS: 1338-23-4

RTECS: EL9450000

Fraction By Weight: 40%

OSHA PEL C 0.7 PPM

ACGIH TLV: C 0.2; 9394

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

HYDROGEN PEROXIDE (SARA III)

CAS: 7722-84-1

RTECS: MX0900000

Fraction By Weight: 2.5%

OSHA PEL 1 PPM

ACGIH TLV: 1 PPM; 9192

2,4-PENTANEDIONE PEROXIDE

RTECS: SA2390000

Fraction By Weight: 7.5%

Effects of Overexposure:EYE/SKIN: BURN/IRRITATION.

First Aid:EYE: FLUSH IMMEDIATELY WITH WATER 15 MINUTES,CONSULT A
PHYSICIAN. SKIN: WASH WITH SOAP & WATER,REMOVE CONTAMINATED
CLOTHING. INGESTION: IMMEDIATELY CONSULT A PHYSICIAN OR LOCAL
POISON CONTROL CENTER.

Flash Point:110F/43C (SETA)
Extinguishing Media:WATER FOR LARGE FIRE. DRY CHEM,FOAM,CO*2 FOR SMALL
FIRE
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER SPRAY TO COOL
EXPOSED CONTAINER
Unusual Fire/Explosion Hazard:IN ADDITION TO HEAT PROD CAN BE
DECOMPOSED BY ACIDS,STRONG OXIDIZING OR REDUCING AGENT
CONTAMINATION

Spill Release Procedures:SOAK UP SPILLED MATERIAL USING A
NON-COMBUSTIBLE ABSORBENT. USING A NON-SPARKING SHOVEL,SCOOP UP AND
DISPOSE OF IMMEDIATLEY.

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINER AT
TEMPERATURE OF 65-85F/18-29C. ONLY INERT,NON-CONTAMINATING
MATERIALS SHOULD BE USED,SUCH AS POLYETHYLENE,TEFLON
Other Precautions:DRAIN THOROUGHLY & FLUSH EMPTY CONTAINERS WITH WATER
BEFORE DISCARDING

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST
Protective Gloves:YES
Eye Protection:YES,CHEM SPLASH GOGGLES
Other Protective Equipment:EYE WASH FACILITY
Supplemental Safety and Health
CHEM NAME: KETONE PEROXIDE IN FIRE RESISTANT DILUENT.

Spec Gravity:1.05
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR COLORLESS LIQUID,SLIGHT ODOR

Stability Indicator/Materials to Avoid:YES
ACIDS,STRONG OXIDIZING OR.REDUCING AGENTS,COMBUST MATERIALS
Stability Condition to Avoid:TEMP ABOVE 145F/62C

Waste Disposal Methods:BY METHODS CONSISTENT WITH LOCAL,STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.